Friday, 24 February 2017
Friday, 17 February 2017
Tips That Facilities With Escalators Need To Follow
It is quite a general rule among buildings with escalators in UAE to call in a professional for the purpose of upkeep of their moving stairways. However, most building management authorities rely entirely upon experts for smooth functioning of their escalators and do almost nothing for maintenance other than switching the mobile pathways on & off.
Every facility having moving stairways and walkways needs to observe certain things in order to ensure safety of everyone around escalators. Here are a few effective tips that can be followed, in addition to opting for escalator maintenance services :
1. Safety signage as well as the right direction has to be displayed prominently and conspicuously. Each step should be mandatorily marked at its edge with vertical yellow lines. Besides that, proper lighting is also quintessential.
2. The authority must make sure that the emergency stop button is functional and can halt the escalator as soon as pressed.
3. It is important for devices that can effectively prevent sliding and climbing to be present. These devices should also keep the feet of passengers from getting accidentally caught in the sides.
4. The handrails of the escalator must move at the same speed as the stairway steps. There should no more than 2 percent of speed deviation. In case anything foreign gets into the handrail inlet, the entire thing must stop moving at once through activation of a safety switch.
5. The whole machinery has to stay free from dust, debris and other pollutants at all times. It is the responsibility of the building authority to ensure proper cleanliness of and around the escalators.
6. The sensors and safety switch which detect issues like open floor plates, missing steps, etc. should always stay in working condition and impede the machinery from working, if activated.
7. It is extremely important for the clearance gaps in the escalators to comply with specific standards.
8. In case the steps surpass their optimal speed due to any reason by over 20 percent, they should stop working at once.
9. The wear & tear of the different components of an escalator must have no effect on its secured and safe operation.
2. The authority must make sure that the emergency stop button is functional and can halt the escalator as soon as pressed.
3. It is important for devices that can effectively prevent sliding and climbing to be present. These devices should also keep the feet of passengers from getting accidentally caught in the sides.
4. The handrails of the escalator must move at the same speed as the stairway steps. There should no more than 2 percent of speed deviation. In case anything foreign gets into the handrail inlet, the entire thing must stop moving at once through activation of a safety switch.
5. The whole machinery has to stay free from dust, debris and other pollutants at all times. It is the responsibility of the building authority to ensure proper cleanliness of and around the escalators.
6. The sensors and safety switch which detect issues like open floor plates, missing steps, etc. should always stay in working condition and impede the machinery from working, if activated.
7. It is extremely important for the clearance gaps in the escalators to comply with specific standards.
8. In case the steps surpass their optimal speed due to any reason by over 20 percent, they should stop working at once.
9. The wear & tear of the different components of an escalator must have no effect on its secured and safe operation.
Thus,
in order to keep the moving stairways of a facility safe and
effectively functional, a building management authority has to
observe these tips carefully and precisely. Not only would they
decrease the chances of likely accidents, but also increase the
lifespan of the escalators.
Wednesday, 15 February 2017
Obvious Signs That You Need AC Maintenance Service
Does
you air-conditioning system produce annoying sounds? Does it act in
reverse with the room temperature? If you tick all the boxes then
it's the high time to look for a professional AC repair service in
UAE. It's not basically tough to identify that the system requires an
upgrade or a repairing solution, but the task can be difficult for
novice users. Homeowners who don't have much idea as to how an AC
works can incur huge repairing expenses due to late identification of
problems existing in their appliance. Therefore, it is very important
to take the right action at the right time.
When
an AC system stops functioning altogether, a homeowner generally
calls a good professional AC repair service provider as soon as
possible. But how do you know that you need to call for a pro service
even when your air conditioner seems to be working fine? Down here
are some quick ways to find out if your appliance has some major
glitch in it and needs to serviced immediately:
No
cooling capacity:
The
most common symptom is a noticeable loss in air-conditioning capacity
of the system. It will not pass through cool air as it should. This
malfunctioning means only one thing - you need to get in touch with a
reliable service provider within the least time possible. Chances are
that the compressor of the air conditioner isn't working and it's
wiring has loosened.
Thermostat
issues:
Sometimes,
the problem with an AC may not be in it, but rather in the
thermostat. The best way to identify this kind of problem is by
noticing if one part of your home gets very cold and another part has
practically no change in its room temperature.
Weird
sounds:
In
case you hear growling sounds coming from your air conditioner
system, make sure you contact AC repair services in UAE immediately and have the professional inspect your system thoroughly.
Weird noises coming from an air conditioner usually indicate
something serious happening inside the system – perhaps the copper
belt has deviated from its track or it needs lubrication.
These
three are the most common and obvious signs to know that you need
immediate AC servicing. Whenever you come across with anyone of them,
the most sagacious thing you can do is call a pro technician and have
them deal with it.
Monday, 13 February 2017
Thursday, 9 February 2017
Subscribe to:
Posts (Atom)